Resistors

COLOR	DIGIT	MULTIPLIER	TOLERANCE	TC
Silver		x 0.01 W	±10%
Gold		x 0.1 W	±5%
Black	0	x 1 W
Brown	1	x 10 W	±1%	±100*10-6/K
Red	2	x 100 W	±2%	±50*10-6/K
Orange	3	x 1 kW		±15*10-6/K
Yellow	4	x 10 kW		±25*10-6/K
Green	5	x 100 kW	±0.5%
Blue	6	x 1 MW	±0.25%	±10*10-6/K
Violet	7	x 10 MW	±0.1%	±5*10-6/K
Grey	8	x 100 MW
White	9	x 1 GW		±1*10-6/K

** TC - Temp. Coefficient, only for SMD devices

Carbon Film, 1/4w ( maximum voltage 500 Vdc or Peak AC RMS )

Carbon Film, 1/2w ( maximum voltage 750 Vdc or Peak AC RMS )

Carbon Film, 1w ( maximum voltage 1500 Vdc or Peak AC RMS )

Carbon Film, 2w ( maximum voltage 3000 Vdc or Peak AC RMS )

Wire Wound, Ceramic Coated, 5w

Wire Wound, Ceramic Coated, 10w

Resistors are manufactured in a wide range of standard so-called "preferred" values. The lower the resistance tolerance, the greater the number of available values. We stock 5% tolerance resistors only, in 1/4, 1/2, 1w, and 2w ratings, of the carbon composition type. Our power resistors are stocked in 5w and 10w ratings, but the range of available values is different for power resistors. These power resistors are wire-wound, ceramic encapsulated, and therefore cannot be used in circuits where non-inductive resistors are required.

Please note that the minimum resistor order can not be less than 10 pieces. Thank you.