|
Measuring Instruments |
|
ONE CHANNEL DIGITAL PC SCOPE-K8031
 
  
The K8031 is a digital storage oscilloscope, using a computer and its
monitor to display waveforms. All standard oscilloscope functions are
available in the Windows program supplied. Its operation is just like
a normal oscilloscope. Connection is through the computer's parallel
port, the scope is completely optically isolated from the computer
port.
|
Features
|
Specifications
-
oscilloscope:
-
timebase: 0.1µs to 100ms per
division
-
trigger source: CH1 or free run
-
trigger level: adjustable per ½
division
-
input sensitivity: 10mV to 3V
per division
-
record length: 4079 samples
-
sampling frequency: 800Hz to
32MHz (Real time)
-
true RMS readout (only AC
component)
-
transient recorder:
-
timescale: 20ms/div to
2000s/div
-
max record time: 9.4hour/screen
-
automatic storage of data
-
automatic recording for more
than 1 year
-
markers for time and amplitude
-
zoom function
-
spectrum analyzer:
|
|
4 CHANNEL RECORDER/LOGGER-K8047
 |
Features
-
record DC signals or slow moving
signals over very long period
-
the measurements are
automatically stored on your hard disk for further processing
-
through the use of USB
connection, there is no need for power supply and installation is
easy and straight forward
-
signals are instantly displayed
on the PC screen using analog or DVM display
-
USB cable included
-
PC-LAB2000 Software included
-
comes with enclosure
Specifications
-
hardware:
-
USB connected and powered
-
four DC coupled input channels
-
input resistance: 1Mohm
-
maximum samples per second: 100
-
four input ranges: 3V / 6V /
15V and 30V
-
sensitivity: 10mV
-
accuracy: ± 3% of full scale
-
maximum input: 30V DC
-
power and recording/diagnostic
LED
-
software:
-
analogue trace or digital DVM
readout
-
4 simultaneous channels
recording
-
minimum / maximum sample hold
function for DVM
-
from 1 sec to 1000 sec per
division
-
storage and recall of screens
(full color) or data
-
automatic recording option for
long time recordings
-
on screen markers for time and
voltage
-
DLL included for own
development
-
system requirements:
Price: $51.90
|
|
POCKET AUDIO GENERATOR-K8065
Price: $39.20
|
Great little gadget for service, repair, testing,
education, etc...
Features
Specifications
-
sine wave: 50Hz, 100Hz, 1KHz,
10KHz, 20KHz
-
burst: 50Hz, 100Hz, 1KHz
-
burst mode: 20ms ON, 500ms OFF
-
noise: 32-bit digital pink noise
-
output level (10Kohm): 0 to 775mV
(0dB)
-
outputs: 2 x RCA (cinch)
-
power supply: 2 x CR2016 or
CR2025 battery (excl.)
-
dimensions: 3.4" x 2.0" x 1.0"
|
|
GENERAL PURPOSE TEMPERATURE SENSOR-K8067
Price: $27.00
|
Applications : measure indoor and outdoor
temperatures, control heating and/or cooling of rooms, equipment,
etc... Monitor temperatures in processes, put a temperature readout on
your website, check your pools temperature, ...
Specifications
-
range: -20° ~ +70°C
-
output: 0 ~ 20mA current loop
-
output voltage compliance: 10V
-
accuracy: 2° full range
-
one single adjustment
-
3-wire system: GND, +V and OUT
-
power supply: 12VDC for 0 ~ 5V
OUT / 15VDC for 0 ~ 10V OUT
-
current consumption: 30mA max.
-
dimensions: 55 x 35 x 15mm (2.2"
x 1.4" x 0.6")
|
|
UNIVERSAL START/STOP TIMER-K2579
 |
Miniature timer for all applications requiring a
delay of up to 60 minutes. The control range may be adjusted.
Specifications
-
power supply: 12VDC / 55mA
-
relay: 3A / 220V switchable
-
time interval (without
modifications): adjustable from 0 to 15 minutes
-
PCB dimensions: 1.5" x 2.7"
Price: $17.40
|
|
SPEED CONTROLLER-K2636
 |
Designed to control AC motors with carbon brushes
(drilling machine, vacuum cleaner, saw, …). High torque, even at low
r.p.m. May also be used for low voltage loads (24V). Supply and load
circuit electrically isolated from one another.
Specifications
-
voltage supply: 110-240V
-
load voltage: 24-240V AC / 5.5A max.
-
adjustable minimum r.p.m.
-
low interference level
-
range: 5-95%
-
PCB dimensions: 5.1" x 3.0"
Price: $47.00
|
|
TEMPERATURE SENSOR-K6001
 |
This kit has been developed especially to be
combined with the K6000RS or K6002 to build a temperature regulation
and control system. The advantage of a separate sensor lies in the
fact that the distance between the actual controller and the sensor is
of no importance.
Specifications
-
sensor temperature range: -40°F
to 302°F
-
pulse width modulation:
200µsec/°F
-
linearity from -10°C(14°F) to
50°C(122°F): better than 0.5%
-
tested up to 164' (distance
between sensor PCB and controller)
-
supply voltage: 12V DC (± 2V)
non-regulated
-
current: 20mA max.
-
PCB dimensions: 1.8" x 1.9"
Price: $29.80
|
|
TEMPERATURE CONTROLLER-K6002
 |
Unlike a normal thermostat, this kit has two
outputs, one for "high" alarm, e.g. to switch on the air conditioning,
and one for "low" alarm, e.g. to switch on the central heating. Both
alarms are adjustable independently, each with their own hysteresis.
Sensor K6001 included.
Specifications
-
relay outputs: 5A / 220V AC
switch-over contact
-
resolution: ± 0.1°C
-
display from -40°C to +150°C
-
24-hour clock (50Hz mains
frequency)
-
alarm setting: from -50°C to
+154°C
-
separate optocoupled sensor input
(for K6001)
-
power supply: 9V AC / 300mA
-
front panel dimensions: 2.4" x
4.6", 3.2" depth
Price: $95.10
|
|
TEMPERATURE SENSOR WITH LED DISPLAY-K6003
 |
This temperature sensor has the same features as
the K6001. In addition, it has an LED display, showing the following
three items : 1) Current temperature reading ; 2) Minimum temperature
setting ; 3) Maximum temperature setting. A splendid aluminum housing
with front sticker is included.
Specifications
-
min. and max. thermometer
-
sensor temperature range: -58°F
to +302°F
-
can be set to degrees Celsius
-
display: 3 ½ digits (0.1° display
resolution)
-
power supply: 12 to 15V DC /
150mA
-
dimensions: 5.7" x 2.0" x 0.9"
Price: $79.80
|
|
MULTIFUNCTION RELAY SWITCH-K8015
 |
14 different functions including timers, switching,
flashing, interval, random switching, ... Two pre-programmed delays.
Learning mode for delays of 2s up to 12 days. Pushbutton control.
EEPROM for delay time storage in case of power failure. On-board
transient filter for the relay contacts. Suitable for control of
incandescent lighting, halogen lighting, fluorescent lighting, fans,
valves, buzzers,...
Specifications
-
operating voltages: 9-12V AC or
12V DC
-
max. load: 2.5A (275W / 110V)
-
dimensions pcb: 3.4" x 1.5" x
1.0"
Price $29.80
|
|
AC POWER SLAVE MODULE-K8034
Price $29.80
|
The purpose of this kit is to activate and
deactivate several electrical appliances simultaneously. By operating
one single switch you can not only activate e.g. your pre-amplifier
but also your power amplifier, CD or DVD player, etc. You can even
operate a fan and a lamp simultaneously.
Features
-
detects small resistive and
inductive loads
-
adjustable sensitivity
-
protected against current
variations in master load
-
relay contacts with inductive
kick protection
-
power indication
Specifications
-
Master + Slave (powered by
module):
-
Slave only (powered externally):
-
dimensions: 4.2" x 4.0" x 1.8"
-
weight (net): 6.6 oz.
|
|
MULTIFUNCTIONAL UP/DOWN COUNTER-K8035
Price: $32.85
|
Features
-
comes in handy for people
counting, part counting, score keeping, ...
-
counts up or down
-
count input through on-board
pushbuttons or by external pulses
-
display modes: normal or time (hh:mm
and mm:ss)
-
an internal oscillator allows
time measurement
-
programmable pre-set value with
equal output
-
self diagnostic at power up
-
comes with easy board-to-wire
connector (20cm wire)
Specifications
-
counter input voltage: 3...12V DC
(normal dry contact also possible)
-
EQUAL output: 5V DC / max. 50mA
-
max. counting speed: 200 / sec.
(2 / sec. with long debounce delay)
-
max. count: 4 digits (9999 /
23h59m / 59m59s)
-
power supply: 9 - 12V DC or
transformer 2 x 9V AC / 300mA
-
power consumption: 150mA max.
-
dimensions: 4.9" x 3.0"
|
|
FAN TIMER-K8041
Price: $24.20
|
Using this kit it is possible to switch on a fan
(ventilator) together with the light. The fan will continue to run for
a period of up to 5min (adjustable) after the light has been turned
off. Very well suited for toilet or kitchen ventilation.
Features
-
suitable for most types of
ventilators
-
solid state switching with noise
suppression
-
can be connected to existing
installation
-
LED function indication
-
an also be used without light as
fan delay timer
Specifications
|
|
2 MODULE DIGITS WITH SERIAL INTERFACE-K8063
 |
Features
-
bright, red, jumbo-sized
7-segment displays (57mm).
-
complete with snap-in enclosure
-
multiple units can be linked in
an easy way to create larger readouts for e.g. score-keeping,
timing, counting, ...
-
easy platform-independent control
via RS232 three-wire interface
-
up to 255 units can be separately
addressed
-
tested with distances of up to
50m between PC and displays
Specifications
-
power supply: 9 to 12Vdc / 120mA
per display
-
RS232 interface: 2400baud / 8
data bits / no parity / 1 stop bit
-
dimensions: 74 x 58.5 x 32mm
(2.9" x 2.3" x 1.3")
Price: $52.35
|
|
POWER SAVER/TIMER-K8075
Price: $31.00
|
The power saver turns off your equipment after a
preset time. It helps you save money and it increases safety.
Features
-
single button operation with LED
mode indicator
-
continuous: 24h turn-off timer
-
slow flashing: long timers
-
fast flashing: short timers
-
dim: off
-
choose short or long-running
timers (one-time jumper setting)
-
10A suppressed relay output
-
easy to add to existing equipment
-
applications:
-
automatically turn off heating,
cooling, lighting, entertainment systems, fans, pumps, sprinklers,
etc...
Specifications
-
available timers: 1h / 2h / 4h /
8h / 24h
-
relay output: 10A / 240VAC max
-
power supply: 100 - 240VAC
-
dimensions: 65x50x26mm
|
|
MULTIFUNCTIONAL CLOCK-K8009
 |
6 x 1.42" high digits. Time, Date & temperature
indication, selectable with toggle option. 1 sec. resolution
chronometer with lap function. Count down function to a specific date,
the last day H:M:S are displayed. Scoreboard function (two players or
teams, count up to 199). Random generator from 00 to 99. 2 digit dice.
Count function. Chime beep option. Relay output for temperature
control or time alarm. US or Europe display option for time, date,
degrees Celsius or Fahrenheit format. All functions and settings are
wireless remote controlled (wired remote is possible).
Specifications
-
fixed 433.92MHz transmitter
frequency, as required by law
-
keychain remote control included
-
temperature indication: from -4°F
to +158°F (resolution 1°)
-
temperature indication: from 32°F
to +302°F (resolution 2°)
-
memory backup option: 9V battery
or rechargeable battery
-
relay output: 1A / 24V max.
-
power supply: 12V DC / 300mA
-
PCB dimensions: 10.0" x 3.2"
Price: $109.20
|
